Parameter Programming
3
Some parameters
are accessible only
when the respective
functionality is installed.
(see
'
Specifications
'
).
- Changing
Point Position
value
reflects on the real value
of all parameters
with ISU!
E.g.: changing
Point Position
value
from (0) to (0.0)
would change
a Set-point value
of 100 to 10.0!!!
Device parameters
BPT50-A is a programmable device whose
service behavior is determined by a set
of parameters. All the parameters, along
with their names, symbols, and value ranges,
are given in Table 1.
Setting numerical parameter value
Enter parameter value adjustment mode
(see '
Program Levels
').
The whole part of the value together with
the left zeroes appears on the display,
and the rightmost digit blinks.
To select another digit, press
.
The 4 rightmost digits can accept values
from
0
to
9
, and the leftmost digit
can accept the value
-
or none.
To increase or decrease the blinking digit
value, use respectively
or
.
Confirm the adjusted value by pressing
simultaneously
+
.
If the new value has not been confirmed
and no key has been pressed for a certain
period of time, value adjustment
automatically ceases, and the parameter
retains its initial value.
Setting symbolic parameter value
Enter parameter value adjustment mode
(see '
Program Levels
').
Read the blinking parameter value.
To change the value, use
or
,
and to confirm, press
+
.
If the new value has not been confirmed
and no key has been pressed for a certain
period of time, value adjustment
automatically ceases, and the parameter
retains its initial value.
