Wiring
3
Important notes:
♦
Power supply must be turned off
during mounting and wiring!
♦
With voltage input, use terminal A10
for range 0...10 V, and A11 – for other
.
♦
Connecting a potentiometer requires
excitation voltage of 5 V, 10 mA
(see
'
Specifications
'
).
Input signal wiring
Connect the input with regard to its type
(see '
Specifications
') through the respective
terminals on the device back.
Voltage transmitters should be powered
ONLY by external source!
Output wiring
Connect the outputs with regard to their types
(see '
Specifications
') via the respective
terminals.
Power supply wiring
Connect the right power supply voltage
for your device (see '
Specifications
')
through the respective terminals.
Parameter Programming
Some parameters
are accessible only
when the respective
functionality is installed.
(see
'
Specifications
'
).
Device parameters
BB
I250 is a programmable device whose
service behavior is determined by a set
of parameters. All the parameters, along
with their names, symbols, and value ranges,
are given in Table 1.
