Technical Documentation
dizzer
®
XL Series Modules for Open Platform
– Assembly Instructions 1.1(2019-01) E inge
Page 44 of 44
© inge GmbH
inge
GmbH
Flurstrasse 27
86926 Greifenberg
Germany
Phone:
+49 8192 997-700
Fax:
+49 8192 997-999
Email:
Website:
www.inge.basf.com
Note
The descriptions, designs, data and product information contained herein are presented in good faith and are based on
inge GmbH’s current knowledge and experience. inge GmbH cannot accept any liability for the accuracy of this product
information, which is provided at no charge and for guidance only.
inge
®
products are designed to be operated in accordance with the corresponding inge
®
product documentation. The
product information and products are protected by copyright and/or other intellectual property laws worldwide. However,
inge GmbH cannot guarantee that the product information and products can be used without infringing third party
intellectual property rights. The products and product information may only be used, distributed and marketed with the
express prior permission of inge GmbH.
No warranties of any kind regarding the products, either expressed or implied, including, but not limited to, warranties of
merchantability, fitness for a particular purpose or no third party rights are made, other than as expressly set out in the
contractual agreement with the customer. Mechanical stability and full functionality of inge
®
products can only be
provided by genuine inge
®
parts.
inge GmbH reserves the right to modify products and product information at any time without prior information. Current
product information can be obtained from the website www.inge.basf.com
.
