background image

 

 

IFX-21 User Guide 

 

BASF 

Contact Information 

7/12/2019 

V004

 

2 of 22 

 

 

1. C

ONTACT 

I

NFORMATION

 

T

ECHNICAL

 

4011 SE International Way, Suite 604 

Portland, OR 97222 

Phone: (503) 794-4073 

Fax: (503) 794-5591 

P

URCHASING

 

46820 Fremont Blvd. 

Fremont, CA 94538 

Phone: (510) 490-2150 

Fax: (510) 252-1871 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Copyright© 2019 BASF Corporation. All rights reserved. 

EXACTUS

®

 and TemperaSure are registered trademarks of BASF Corporation. The data contained in this publication are 

based on our current knowledge and experience. In view of the many factors that may affect processing and application of 
our product, these data do not relieve processors from carrying out their own investigations and tests; neither do these 
data imply any guarantee of certain properties, nor the suitability of the product for a specific purpose. Any descriptions, 
drawings, photographs, data, proportions, weights, etc. given herein may change without prior information and do not 
constitute the agreed contractual quality of the product. It is the responsibility of the recipient of our products to ensure 
that any proprietary rights and existing laws and legislation are observed.  

Although all statements and information in this publication are believed to be accurate and reliable, they are presented 
gratis and for guidance only, and risks and liability for results obtained by use of the products or application of the 
suggestions described are assumed by the user. NO WARRANTIES OF ANY KIND, EITHER EXPRESS OR IMPLIED, 
INCLUDING WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE MADE 
REGARDING PRODUCTS DESCRIBED OR DESIGNS, DATA OR INFORMATION SET FORTH. Statements or 
suggestions concerning possible use of the products are made without representation or warranty that any such use is 
free of patent infringement and are not recommendations to infringe any patent. The user should not assume that toxicity 
data and safety measures are indicated or that other measures may not be required. ©2019 BASF Corporation. 

Содержание EXACTUS IFX-21























Отзывы: