manualshive.com logo in svg

BASETech 1425526, Руководство по эксплуатации

Поделиться
Скачать
BASETech 1425526 Скачать руководство пользователя страница 22

9. Initial setup of the WiFi door inter-

com system

a)  WLAN set up

In order to integrate the exterior unit into your network wirelessly 

via WLAN, proceed as follows.
Connect:
•  If not yet done so already, plug the AC adapter into the mains 

socket to power the exterior unit and wait for approximately 30 

seconds for the start-up procedure to complete.

  Important! The following description for the WLAN 

connection will function only, if no network cable iscon-

nected.

 When the door intercom system is started, short beeps 

will sound repeatedly with longer pauses in between. 

This signals the readiness for the detection of the QR 

codes. After some time the door intercom system exits 

the programming mode and beeps are not heard any 

longer. Unplug the system briefly from the power supply.

 

If also after several restarts, no beep is audible, reset 

the WiFi door intercom system to factory settings first!

 

Please note also that the system supports 2.4 GHz 

WLAN networks only. 5 GHz networks are not sup-

ported.

22

Содержание 1425526

















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды