Baseband Technologies Inc.
Title: Stamp-size Ultra Low-Power GPS Receiver Module User Guide Rev 1.0
Page 33
•
Type “
gpsconsole 6 powermeasurement
” to program the Stamp Module using the
sample configurations defined in the powermeasurement.gc script (see section 4.1
for gpsconsole commands)
•
Confirm that LED D7 is turned off and that the message “
Battery charging
DISABLED
” is displayed as shown in the example below.
4.3.1.2
Typical measurement results
As described in sections 3.4 and 4.1, customers can configure the receiver to collect
the desired amount of IQ data (section 4.1.7) and output data at a certain update rate
(section 4.1.19).
Table 1 below shows some typical measurement using the set up as illustrated in
Error!
Reference source not found.
above.
