Basalte Auro Cresnet, Руководство пользователя

Страница: 12 / 13

Auro Cresnet
Manual
12 / 13 v1.0 © 2017 basalte
An overview of all available signals and parameters on the Basalte Auro Configuration symbol:
Signal Name and Type
Description
Digital input:
<
Initialize >
When a High pulse is sent on this input, all configured
parameters are sent in 1 configuration string to the
corresponding Basalte Auro device.
High/1 (pulse) = Send configuration string
Serial outputs:
<
Initialize_To_Device$ >
Needs to be connected to the serial input < Configuration$ >
on the Basalte Auro device symbol.
Parameter:
<
LED Mode >
Defines the behaviour of the Auro’s internal Led when motion
is detected.
When set to ‘ Follow Motion ’, the Led will automatically be
activated as long as Auro’s Digital output ‘ Motion ’ is High.
When set to ‘ Use Join ’, the Led will be controllable with the
Auro’s digital input ‘ LED ’ .
Th
e ‘LED’ input will always control the Led, even if the ‘ LED
Mode ’ is on ‘ Follow Motion ’.
Available settings:
Follow Motion
Use Join
Parameter:
<
Lux Sensor >
Defines how the Basalte Auro’s lux value is measured.
If enabled, the lux value can be sent cyclically on a definable
time interval, or on a minimal change in value.
Available settings:
Disabled
Cyclic
Delta
Parameter:
<
Lux Cyclic Time >
Defines the time interval for the lux value to be updated
when the ‘ Lux Sensor ’ is set to ‘ Cyclic ’.
Available settings range from 5 to 60 seconds in steps of 5
seconds.
Parameters:
<
Lux Delta >
Defines a minimal change factor which defines when the lux
value will be updated. When a high factor is selected, the
delta lux will be higher.
Available settings range from factor 1 to factor 9.
Parameter:
<
Lux Compensation >
Due to environmental factors (e.g. dark colored floor), a lux
comensation may be required.
The measured lux value will be multiplied by a selectable
number.
Available settings range from 0.1 to 10 in steps of 0.1.