Pagina N°.
Page Nr.
Edizione
Edition
S.p.A
11-93
25
The mechanical moving parts of the turret are permanently lubricated.
The lubricant must be renewed only after eventual complete dismantling of the turret.
The lubricant, with viscosity 80 SW 90, must be compatible with rubber & teflon.
The following table indicates the quantities to be used.
LUBRICATION OF THE ROTATING TOOLS MECHANISM
The mechanism of the rotating tools is lubricated with oil 80 SW 90. The oil must be changed every new re-assemble.
For this reason on the top of the 722 counterplate is located the hole for the filling.
Take off the airtight plug or the feeding pipe connector of the coolant, take off the spiral spring; then extract the bush
033 complete of O-Ring 322 by using a suitable thread X.
Clean the seating from any eventual incrustation, grease the outside part of the new bushes complete of O-ring, then
insert them in their seating and check the sliding.
TOEM 120
0,150
TOEM 160
0,200
TOEM 200
0,300
TOEM 250
0,400
Airtight plug
033
X
SUBSTITUTION OF THE COOLANT BUSHING
Quantity
of
lubricant
Kg
LUBRICATION &
SUBSTITUTION OF THE
COOLANT BUSHING
Turret size
Quantity of oil
Kg
0,500
0,700
1,500
2,000
TOEM 120
TOEM 160
TOEM 200
TOEM 250
Turret size
