Baruffaldi CE 11, Руководство по эксплуатации и обслуживанию

Страница: 22 / 59

USE AND MAINTENANCE MANUAL
2-Speed Gearboxes Series CE
M
.CE.GEN.ENG.DOCX
Issued 2018 Rev.03
Page 22 / 59
•
ASSEMBLE THE GEARBOX UNIT WITH MOTOR+ PINION CLAMPING UNIT (100)
k) Check that the O-ring is in place
l) Gently push the gearbox towards the motor flange, until they get in contact. Turning the
output shaft by hand can help engage the sun gear (12) with the planets (07)
m) Tighten the screws: see chapter 3.2.1 - d) for the possible configurations
Step 3
When inserting the sun gear (12) inside the planetary unit, pay attention not to damage the
gears, as this would result in increased noise during operation. If you feel that the gears do
not engage smoothly, slowly turn the output shaft (04) by hand until the sun gear engages
properly.
100
12 07
04
O-ring
No warranty will be applied if the gearbox is noisy in low gear, due to sun gear damages
produced during motor flange assembly operations.