- 42 -
Programs
It is possible to set up to 5 programs (M1
– M5). The required program should be set in
the following way:
Press the program key
“M”
(2) once. The M1 LED comes on. Now select free
program for data entering.
After selecting the program press “Save” key (4).
Hint:
to select another free program and enter data press the program key
“M”
(2),
depending on free program:
M2
– program 2 - 2 times
M3
– program 3 - 3 times
M4
– program 4 - 4 times
M5
– program 5 - 5 times
In case of accidental pressing the program key
“M
” (2) six times the LED indicators
go off. To return to data entering press the program key
“M”.
again.
To enter data into the individual programs press the program key
“M”
(2) again to
save the required temperature and cooking settings in program M1. The M1 LED
comes on.
Press the temperature setting key (10), the temperature indicator blinks. When the
temperature indicator blinks, keys
“-”
(8) or
“+”
(9) allow for setting the required
temperature in range from 25 °C to 90 °C.
Finally press “Save” key (4).
The LED indicator for program M1 is on and the cooking time may be set. Press the
time setting key (7), the cooking time indicator blinks and the required cooking time
may be decreased or increased with use of keys
“-”
(8) or
“+”
(9). Finally press
“Save” key (4).
After entering settings for program M1 press the program key
“M”
(2) twice to
select free program M2 and enter data for it. Setting of all successive programs
should be realized in the same way as for program M1.
5.2.4 Cooking food
After entering the required temperature and time settings press the Start/Stop
key (11) to heat water in the basin to the preset temperature.
In order to use of previously set programs press the program key
“M”
(2)
depending on program to be used (e.g. three times for program M3). Then press
Start/Stop key (11) to heat water in the basin to the preset temperature. When the
device starts heating the acoustic signal is emitted.
