- 38 -
6. Cleaning
CAUTION!
Before cleaning disconnect it from the power supply (pull the plug!) and wait
until the device has cooled off.
The device is not suited for direct washing with water.
Therefore, do not use any kind of pressure water jet for cleaning the device!
Make sure that no water gets into the device.
CAUTION!
Never use abrasive cleaning agents or scouring materials which may damage
the surface of the device.
o
Clean the device regularly.
o
Remove the basket from the basin. The heating element and its shield can be easily
removed from the basin by removing the control box from the basin.
CAUTION!
The control box (control panel) must not be wet cleaned or immersed in
water. Moisture must not get inside the device.
o
Clean the heating element with a soft, moist cloth and a mild cleaning agent.
o
Frying oil or liquid fat should be carefully poured out to an appropriate container
after they have cooled off. Observe the instructions included in section „Pouring
out and removing frying oil/ liquid fat“.
o
The lid, basin and basket should be cleaned in a warm water with a mild cleaning
agent. Heavily soiled elements may be soaked for a short time.
o
Control panel, surface of the device and power cord should be cleaned with a moist
cloth and a mild cleaning agent. Make sure that no moisture gets inside the control
box. This may lead to dangerous creeping current and interruptions in the operation
of the device.
o
Before mounting, dry all the elements thoroughly! Reassemble the device.
o
If the device is not used for any lengthy period, clean it according to the
aforementioned description and store it in dry, clean place protected against cold, sun
and children. To protect the device against dirt, cover or pack it. Do not place any
heavy objects on the device.
