Bartscher MX 235 Plus, Инструкция по эксплуатации

Страница: 46 / 172

- 42 -
Operation of the device
The device must be switched on while observing the following instructions:
1. Inspect the power supply at the place of work;
2. Inspect the correct assembly;
3. Carry out the controls / inspections before switching the device on ( see table, p. 41 );
4. Control compliance with all safety regulations;
5. Place the desired food products in the pot;
6. Insert the plug to the appropriate socket;
7. Holding the device with both hands in appropriate places
( fig. on the right ): one hand at the retaining flange of the
mixing stick (or another equipment), and another holding the
device body near the
ON button;
8. Switch the device on:
a. put the mixing stick in the pot,
b. set the desired speed using the speed regulator,
c. start the device by pressing the ON button which must
be pressed until the food products are processed.
9. As soon as the processed food products obtain the
desired consistency, release the ON button, wait approx.
10 seconds and put the device on the appropriate work
surface. Pull the plug from the socket.
WARNING! Risk of incised wounds!
Keep the hands and other body parts away from the area
in which the mixing stick is located if it is mounted on the
motor unit and the device is switched on.