- 46 -
Replacement of the convection oven interior lamp
o
When the interior lighting lamp
does not work, replace it with a
new heat-resistant bulb with the
same features as the original
lamp.
Fig. 11
o
Remove the guiding rails (fig. 6).
o
Open the cover (fig. 11) of the interior lighting and remove the damaged lamp. Turn in
the new lamp and fit the cover. Then, insert the guiding rails and screw them in.
7. Possible malfunction
In case of malfunction, immediately disconnect the device from the power supply.
Use the table below to verify if it is possible to clear the malfunction
before you contact the customer service or vendor.
Problem
Cause
Solution
The device is connected
to the power supply, the
temperature and function
has been set, but the
operational control lamp
is off and the device
does not heat-up.
The plug is not properly
connected to the socket.
Safety fuse tripped.
Remove the plug and
insert properly into the
socket.
Check fuse, connect
device to another socket.
The heating indicator is
on but temperature does
not rise.
Interrupted contact with
the heating element.
Damaged heating
element.
The temperature controller
is damaged.
Contact the service
company.
Contact the service
company.
Contact the service
company.
The device switches off
by itself when operating.
The security thermostat
has been activated
Once cooled down, the
device restart automati-
cally. If the device cannot
be restarted to operate,
contact the customer
service
