Cleaning
A162828
21 / 26
EN
Overheating Protection System
If the fryer is accidentally switched on without frying oil / fat in cube (block), or if the
basin is filled with fat to the level below required minimum, the overheating
protection system automatically switches off the appliance. This function serves the
purpose of protecting the appliance against possible damages.
1. Disconnect the appliance from mains power supply.
2. Perform the following steps:
– leave the appliance to cool down completely;
– screw off plastic cover over the RESET button on
the rear wall of the control box, rotating it counter-
clockwise;
– press the button;
– screw the plastic cover anew, rotating it clockwise;
– switch the appliance on as usual.
Fig. 6
6
Cleaning
6.1
Safety Instructions for Cleaning
• Before cleaning, disconnect the appliance from the power supply.
• Leave the appliance to cool down completely.
• Make sure water does not enter the appliance. Do not immerse the appliance in
water or other liquids during cleaning. Do not clean the appliance with a
pressurized water jet.
• Do not use any sharp or pointed, nor metal implements (knife, fork, etc.). Sharp
or pointed implements may damage the appliance, and when in contact with live
parts, they may cause electric shock.
• For cleaning, do not use any scouring agents that contain solvents nor corrosive
cleaning agents. They may damage the surface.
