Installation and operation
16 / 26
A162828
EN
NOTE!
For safety reasons, the appliance operates only when the control box is
properly mounted on the housing, so that the micro-switch below the
control box sets the appliance ready for operation.
5. After cleaning, mount the control box with heating element on the fastening
element of the appliance.
Fat drain tap is equipped with a safeguard, preventing its
accidental opening. First, the tap must be pressed in
—
only then may it be rotated.
6. Prior to filling the basin with frying oil / fat in cubes
(blocks) close the fat drain tap.
Fig. 3
Instructions for Using Frying Oil or Fat in Cubes (Blocks)
• Always use oil suitable for frying (e.g. vegetable oil, sunflower oil, peanut oil,
etc.) or fat in cubes/blocks only.
ATTENTION!
Fat in cubes (blocks) should never be melted in high temperatures; this
may cause the temperature sensor to get damaged.
Fat in cubes/blocks should be melted in the deep-fat fryer, with melting point
position selected.
Observe indications in section
'Indications for Melting Fat in Cubes (Blocks)'
.
• Use only oils and fats that are suitable for frying in high temperatures.
• Never mix different types of oil or fat as their boiling points may vary.
