- 41 -
6.3 Operation of the device
Before the operation, clean the device according to the instructions presented in
section
7 „Cleaning“
.
Place an suitable cooking pot or pan on the device’s hob.
CAUTION!
Never place empty pot or pan on the hob.
With longer heating of empty dish it may become very hot which
might lead to overheating of the device.
Device start-up
In order to start the device, turn the control knob
clockwise from OFF mark
„
•
“
on the device to the
desired power level within the range from 1 to 20.
The selected power level is shown on the digital
display of the device.
Description of output for individual power levels is
presented in the table on the next page.
Turning the device off
To turn the device off, turn the control knob to OFF.
„
•
“
mark.
Do not rely on the
pan detection function!
Heating mode is disabled and
“H”
is shown on the digital display until the device
cools off.
After the device is switched off, the fans will work for some time to cool down the
electronic components of the device.
OFF
mark
