Bartscher FW 10, Инструкция по эксплуатации

Страница: 19 / 23

- 40 -
ATTENTION!
Do not allow the motor to work in return motion mode for a longer period (press
the return motion button ). When this function is activated, food products travel
in the direction of the motor housing and may get inside it.
→
If the food products fail to be released after a short time, turn the unit off (using the
power ON/OFF switch) and remove the plug from its socket. Clean the unit following
the instructions in 6.2 "Cleaning".
Preventing overheating
•
The unit is equipped with a mechanism to prevent overheating, which automatically
turns the unit off in case the motor begins to overheat..
•
If the motor stops during use, immediately remove the plug from its socket and turn the
unit off (press Start/Stop button and the power ON/OFF switch).
•
Leave the unit to cool and clean it following the instructions in 6.2 "Cleaning".
•
To prepare the unit for further use, press the
button marked Z at the bottom of the unit (see
fig. right).
•
Connect the unit to its socket, turn it on again
(press power ON/OFFswitch and then
Start/Stop
button).
•
If the overheating safety mechanism activates
again, contact a service agent or sales agent.
Tips and advice
•
Always process only fresh food products. Especially with meat, remember to process
it immediately before cooking. Ground meat has a short shelf life, even when kept in
cold storage.
•
Before processing food products cut them into appropriately small pieces or strips
that will fit into the grinding funnel and can be easily processed. Cut meat into pieces
approx. 10 cm long and 2 cm thick; cut harder food products into cubes of 1 cm.
•
When processing larger quantities of food products, divide them into portions that can
be processed in 2 to 3 minutes. Turn the unit off between portions to avoid
overheating; prepare the next portion for processing while waiting for the unit to cool.
•
Never use the unit to process food products with very hard pieces (e.g. seeds, shells,
nuts, bones, etc.). These parts should be removed before processing. Boil hard
vegetables before processing.