- 26 -
WARNING! Danger of injury!
Do not touch the vaporizer during ice production
!
•
Make sure to check the water level at regular intervals during the operation of the ice
cube maker. If the water pump cannot inject any water, the ice cube maker shuts off
automatically and the indicator
lights up. In this case, press the button
and
fill up water up to the marking. Wait three minutes before the coolant in the
compressor has settled before starting the device again by pressing the button
once again.
•
The ice cube maker stops automatically, the indicator
lights up and indicates
that the ice cube basket is full.
NOTE!
For sanitary reasons, you should dispose of the ice cubes produced in the first
cycle. Do not use them for beverages or cooling food.
•
The ice cube maker goes into standby mode and starts producing new ice cubes
when the previous ones are taken out.
NOTE!
For reasons of hygiene, you should change the water in the water container every
24 hours. If you are not using the device, drain the water from it.
6. Cleaning and maintenance
6.1 Safety advice
o
Before beginning with repair or cleaning works make sure the device has been
disconnected from power socket (pull the power plug!) and has cooled down.
o
Do not use any acid agents and make sure no water ingresses the device.
o
To protect yourself from electric shock, never immerse the device, its cables
and the plug in water or other liquids.
CAUTION!
The device is not suited for direct washing via water jets. Therefore, you must
not use any kind of pressure water jet for cleaning the device!
