Bartscher AT90-DIG, Руководство пользователя, Страница: 17 / 22

Installation and operation
A120799 15 / 22
EN
Thermal Processing Time Setting
The thermal processing time may be set in the range of 0
–99 minutes.
1. Set the required thermal processing time with the use of settings value increase
or decrease buttons.
The set thermal processing time is displayed in the digital thermal processing time
display.
2. To confirm, press the SET function button.
Timer Activation
1. When the appliance reaches the set temperature, activate the timer by pressing
Timer start button.
Timer indicator light blinks.
The remaining time of thermal processing is displayed on a relevant digital display.
When the timer is activated, you may freely and at any moment change the time
currently remaining to the end of thermal processing.
2. To this ends, press the settings value increase or decrease buttons and change
the thermal processing time to the required value, but do not store the value.
The newly set thermal processing time will be shown on the digital thermal
processing time display.
After expiry of the set thermal processing time, “END” message will be shown on a
respective digital display and audible signal will be generated for 6 seconds.
Internal lighting ON/OFF
The internal lighting of the appliance may be switched on independently by pressing
respective button on the control panel. To switch the lighting off, press the same
button again.
Indicator Lights
Next to digital time and temperature displays, there are three indicator lights on the
control panel:
– Heating
– Lighting
– Timer
Heating and lighting indicator lights are continuously on, as soon as respective
functions are activated.
When timer is activated, respective indicator light blinks a few times per second.