- 25 -
•
Do not use any accessory or spare parts that have not been recommended by the
manufacturer. These can be dangerous for the user or lead to damages of the device
or personal injury, and further, the warranty expires.
•
Do not lay the cable over carpets or heat insulations. Do not cover the cable. Keep
away the cable from operating range and do not dunk it into water.
•
Do not move or tilt the device when in operation.
WARNING! Hazard via electrical current!
The device can cause injuries due to improper installation!
Before installation the local power grid specification should be compared with
that of the device (see type label).
Connect the device only in case of compliance!
Take note of the security advice!
5.2 Installation and connection
CAUTION!
Installation and maintenance operations may only be performed by qualified
professionals!
•
Discard the complete packing material after unpacking the device.
•
Carefully remove the protective foil from internal surfaces to avoid leaving any
adhesive tape. If any adhesive tape does remain stuck, remove it using an
appropriate agent.
•
Place the unit on a flat, stable floor space which can support the weight and is not
sensitive to heat.
•
Not at any time should you place the device on an inflammable surface (such as:
table cloth, carpet, etc.).
•
You must not position the device near open fireplaces, electric ovens/arc furnaces,
furnaces/electric heaters or other heat sources.
•
Place the unit so that the ventilation ducts at the rear are not blocked in any way.
•
Do not place the unit near walls or other objects made of flammable materials.
Keep a minimum distance of 20 cm on all sides of the unit.
•
Do not place any objects on the unit.
NOTE!
The device is not a built-in device and should not be installed as such!