- 41 -
It is also possible to display the elapsed cooling time by pressing the button „cooling with
time regulation”
. The elapsed time will be displayed for 5 seconds in green.
If you wish to remove the food product from the refrigerator-flash freezer, press the
START button
to suspend the rapid cooling cycle.
To place the unit in STANDBY mode, press and hold for 3 seconds one of the following
buttons
.
The internal unit temperature will be displayed in green.
The refrigerator-flash freezer is prepared for a new rapid cooling cycle.
To begin the next cooling cycle, press and hold for 3 seconds one of the following
buttons
.
HARD rapid cooling with time regulation
1. Insert the probe into the food product.
CAUTION!
Insert the internal product temperature probe into the food product to a maximum
depth of 2 – 3 cm.
2. Hold the button „cooling with time regulation”
. The display will show the current
internal product temperature. Press the button „cooling with time regulation”
and
hold until the display shows the word „HARD“.
After 3 seconds the display will show in red the internal unit temperature during rapid
cooling (-15°). This value may be changed using the buttons marked
or
.