- 38 -
It is also possible to display the elapsed cooling time by pressing the button „cooling with
time regulation”
. The elapsed time will be displayed for 5 seconds in green.
If you wish to remove the food product from the refrigerator-flash freezer, press the
START button
to suspend the rapid cooling cycle.
To place the unit in STANDBY mode, press and hold for 3 seconds one of the following
buttons
.
The internal unit temperature will be displayed in green.
The refrigerator-flash freezer is prepared for a new rapid cooling cycle.
To begin the next cooling cycle, press and hold for 3 seconds one of the following
buttons
.
„HARD“ rapid cooling with temperature regulation via probe for
measuring internal product temperature
1. Insert the probe into the food product.
CAUTION!
Insert the internal product temperature probe into the food product to a maximum
depth of 2 – 3 cm.
2. Hold the button “cooling with temperature regulation via the probe for measuring
internal product temperature”
. The display will show the current internal
temperature. Press the button
again and hold until the display shows the word
„HARD“.
After 3 seconds the display will show in red the internal unit temperature during rapid
cooling (-15°). This value may be changed using the buttons marked
or
.