Installation and operation
16 / 24
A190149
EN
The temperature will be reduced automatically and coffee will be kept in the serving
temperature, until the ON/OFF switch is switched to
'O'
position or the plug is
removed from the mains socket.
Coffee serving
1. Place a cup under the drain tap, press
the tap slightly down and hold until the
cup is filled with required amount of
coffee.
2. Release the drain tap
— it closes
automatically.
3. In order to obtain full flow press the tap
lever fully down.
Switching the appliance off
1. Switch the ON/OFF switch to
'O'
position, when liquid stops flowing from the
drain tap of a vertically positioned appliance.
2. Disconnect the appliance from mains power supply
3. If needed, after cooling down, refill the coffee machine with fresh water and run
anew the brewing process.
Safety thermostat
The appliance is equipped with a safety thermostat that is activated in case of
overheating of the appliance. The red malfunction indicator light comes on.
The safety thermostat is engaged in the following cases:
1. There is no water in the water tank. Proceed the following way:
– Switch the appliance off.
– After cooling down, press the RESET button at the bottom of the
appliance.
– Refill with fresh water.
– Switch the appliance on as usual.
2. The appliance is scaled. In such a case proceed the following way:
– Switch the appliance off.
– Descale the appliance following the instructions in section
“Descaling”
.
