- 38 -
5. Installation and operation
5.1 Installation
CAUTION!
Any installation, connection and maintenance work related to the device
may be performed by the qualified and authorised technician only,
according to the valid international, national and local regulations.
Positioning
Unpack the device and remove all packing material.
Place the device on top of an even, stable, dry and water-resistant surface which
supports the weight of the device and is not heat sensitive.
Never
place the device on the flammable surfaces.
You must not position the device near open fireplaces, electric ovens/arc furnaces,
furnaces/electric heaters or other heat sources.
Never
place the device at the edge of a table to avoid accidents.
Never
place the device in humid or wet environment.
When locating the device make sure there is a 10 cm gap from any walls or other
objects.
Place the device so that the plug is easily accessible for quick disconnection of the
device from power supply, if necessary.
Before the first use, remove the protective foil from the device. Remove the foil slowly
not to leave glue residues. Remove possible glue residues with appropriate solvent.
CAUTION!
Never remove the type plate and warning signs from the device.
