- 38 -
6. Cleaning
CAUTION!
Before cleaning, switch the device off using ON/OFF button, disconnect it from
the power supply (pull the plug!) and wait until the device has cooled off.
The device is not suited for direct washing with water.
Therefore, do not use any kind of pressure water jet for cleaning the device!
Make sure that no water gets into the device.
CAUTION!
Never use abrasive cleaning agents or scouring materials which may damage
the surface of the device.
o
Clean the device regularly.
o
Remove the basket from the basin. The heating element and its shield can be easily
removed from the basin by removing the control box from the basin.
CAUTION!
The control box (control panel) must not be wet cleaned or immersed in
water. Moisture must not get inside the device.
o
Clean the heating element with a soft cloth and mild cleaning agent.
o
Clean the lid and the basket in warm water with a mild cleaning agent. Heavily soiled
elements may be soaked for a short time.
o
Frying oil or liquid fat should be carefully poured out to an appropriate container
after they have cooled off. For this purpose, lift the handle of the oil drain tap and tilt
it forward. Observe the instructions included in section „Pouring out and
removing frying oil/ liquid fat“. Clean the basin.
o
Control panel, surface of the device and power cord should be cleaned with a moist
cloth and a mild cleaning agent. Make sure that no moisture gets inside the control
box. This may lead to dangerous creeping current and interruptions in the operation
of the device.
o
Before mounting, dry all the elements thoroughly! Reassemble the device.