Bartscher A150114G, Инструкция по эксплуатации

Страница: 26 / 72

- 26 -
WARNING!
In case the temperature controller is not plugged in appropriately abnormal
heating can arise and lead to accidents and damage. Therefore the correct
connection of the temperature controller must be ensured.
2 . Connect the device to appropriate power supply source.
3. Adjust temperature scale according to requirements. The control lamp lights up and
hereby indicates that the device is switched ON.
Setting of temperature scale for the respective meals
Scale (°C) Meals
MIN - 1 up to 100 Heating up
2 over 100 Frying goods, Hamburgers etc.
3-4 150 - 200
Pan cakes, scrambled eggs,
ham, bacon etc.
5 240 Grilling goods, Pizza
4. After switching the device wait for 5-10 minutes until the control lamp flashes up so
you can begin cooking.
•
While operating the control lamp is blinking. This is no failure. The
automatic temperature controller works properly.
•
During the use of the device snapping sounds can occur. This is no
failure. The sound is aroused by the thermal expansion of the heater and
the heating surface.
•
Do not put your hand under the body and do not put any flammables on
the multi pan.