background image

GB - 26

 

7.6.6. BLACKOUT ALARM

 

 

If a blackout occurs during a blast chill cycle, the machine remembers the cycle and phase it was 

 

 

performing when it switched off.

 

 

In cycles with food probes, the machine also remembers the cycle.

 

 

Blast chill time tolerance is 10 minutes. 

  Code 

AL7 

will 

fl ash on DISPLAY 1. 

 

 

The buzzer (optional) sounds but can be stopped by pressing a button. If the button is pressed again,  

  the 

display 

disappears.

 

7.6.7. CABINET PROBE ALARM ===> CONTACT TECHNICAL ASSISTANCE

   

 

The cabinet probe measures the temperature of the cabinet, which is indicated on DISPLAY 2.

 

 

If the probe is defective, a cabinet probe alarm and buzzer (optional) are activated and error code  

  ER1 

fl ashes on the DISPLAY 1.

 

 

The buzzer (optional) sounds, but can be stopped by pressing a button.   

 

 

 

 

 

Once the fault is remedied, the alarm cancels automatically.

 

 

- In the case of a faulty cabinet probe, it is nevertheless possible to start or continue a blast chill pro- 

  gramme 

with 

timer.

 

 

- A set temperature blast chill programme not yet started, will convert the setting to time.

 

 

- If the food probe is not inserted, a set temperature blast chill programme in progress will convert  

 

 

the setting to time and the compressor check will be performed on the food probe instead of the   

  cabinet 

probe. 

 

 

- A set temperature blast chill programme in progress with food probe inserted, turns the compressor  

 

 

on and off on the basis of times memorised previously in blast chill or conversation phases.

 

7.6.8. FOOD PROBE ALARM ===> CONTACT TECHNICAL ASSISTANCE

 

 

The food probe is used for reading core temperature in blast chill cycles.

 

 

A fault in the food probe causes an alarm only if a set temperature blast chill cycle is in progress. 

 

 

In this case the cycle automatically coverts the setting to time and the buzzer (optional) is activated.  

 

 

Alarm code ER2 will fl ash on DISPLAY 1.

 

 

The buzzer (optional) sounds, but can be stopped by pressing the button.  

 

 

 

 

 

The alarm code display disappears by pressing a button.

 

 

 

7.6.9. EVAPORATOR PROBE ALARM  ===> CONTACT TECHNICAL ASSISTANCE

 

 

The probe allows termination of defrosting based on temperature.

 

 

Press and release button 

 , to see the temperature of the evaporator which is shown on  

 

  DISPLAY 

2.

 

 

If the probe is defective, an evaporator probe alarm and buzzer are activated, and error code ER3  

 

 

fl ashes on the display.

 

 

The buzzer (optional) sounds but can be stopped by pressing a button.    

 

 

 

 

 

Once the fault is remedied, the alarm cancels automatically. 

 

 

With the probe alarm on, defrosting terminates in time.

Содержание 700610














Отзывы: