Bartscher 350, Инструкция по эксплуатации

Страница: 22 / 26

Cleaning and Maintenance
20 / 24 700276
EN
Switching the LED Lighting ON/OFF
1. If needed, switch the LED lighting off with a suitable switch (1, Fig. 1).
Switching the Appliance OFF
1. If the appliance is not used any more, rotate the temperature controller to '0'
position (2, Fig. 1).
2. Disconnect the appliance from power supply (pull the plug out).
6 Cleaning and Maintenance
6.1 Safety Instructions for Cleaning
• Before cleaning, disconnect the appliance from the power supply.
• Leave the appliance to cool down completely.
• Make sure water does not enter the appliance. Do not immerse the appliance in
water or other liquids during cleaning. Do not clean the appliance with a
pressurized water jet.
• Do not use any sharp or pointed, nor metal implements (knife, fork, etc.). Sharp
or pointed implements may damage the appliance, and when in contact with live
parts, they may cause electric shock.
• For cleaning, do not use any scouring agents that contain solvents nor corrosive
cleaning agents. They may damage the surface.
6.2 Cleaning
1. Wash the appliance regularly.
2. Remove all objects from the appliance and store them temporarily in a cool
room.
3. Remove all shelves from the appliance.
4. Clean shelves with mild washing agent and soft cloth or sponge in warm water.
5. Rinse shelves with clean water and dry thoroughly with soft cloth.
4. Internal surfaces of the appliance and all plastic elements should be protected
against fats, acids, sauces. If, nonetheless, they reach the surface, clean the
affected place immediately with warm water and a mild cleaning agent.
ATTENTION!
Never use hot water to clean the appliance.