Bartscher 350, Инструкция по эксплуатации

Страница: 19 / 26

Installation and operation
700276 17 / 24
EN
Fig. 6
1. Undo two bolts (7, Fig. 6) and remove the bottom support from the hinge (8),
together with the set of washers (6) on the axis, as well as intermediate element
(5).
2. Undo bolts (7) and remove the support from the hinge (11).
3. Remove the door (4).
4. Undo the bearing journal (2), together with a nut (1) and washers (3), out of the
top support of the hinge.
5. Install the entire set at the opposite side of the door.
6. First, rotate the door (4) by 180º, and then slide the top bearing journal (2) into
the door (4) and hang the door (4).
7. Undo fastening bolts (12) from the door and remove the door handle (13).
8. Install the door handle (13) at the opposite side.
9. Close the openings for bolt with expansion plugs.
The plate (10) remains in its place.