- 48 -
Making vacuum bags from foil rolls
•
Select the foil roll of appropriate size to make a bag.
•
Set the device on an even surface. Connect the device to a single grounded outlet.
The indicator diodes for the
„Normal“
and
„Dry“
modes light up.
•
In order to make a vacuum sealing bag from a roll of film, proceed as follows:
1. Press the release buttons and open
the cover.
2.
Make sure the knife is located at either
end of the cutting mechanism (right or
left), never in the middle.
3.
Raise the cutting mechanism and
place the roll of film in the recess
under the cover foreseen for this
purpose.
4.
Extend the film roll to the desired
length.
5.
Pull the cutting mechanism down and
lay it over the film roll.
