Bartscher 300741, Руководство пользователя

Страница: 17 / 32

- 41 -
5. Installation
Positioning

Unpack the device and remove all package materials according to the valid
environment protection regulations.
CAUTION!
Never remove the nameplate and warning signs from the device.

Put the device on an even, stable, dry and waterproof surface which is resistant to
high temperature.

Never place the device on an inflammable surface.

Do not place the device near open flame, electric heaters or other heat source.

Never put the device in a moist or wet area.

Never place the device near flammable materials, suchas alcohol, spirits, or petrol.

Never place the device near or on the edge of the worksurface. It is necessary to
leave enough space in front of the device to place plastic bags.

It is necessary to pay attention to ensure good air circulation around the vacuum
packing machine. There should 20 cm of free space at the sides of the device, and
1 m above it.

The device must be placed in an area inaccessible to children. It is necessary to
ensure that small children cannot access the device by pulling the power cable.

Place the device so that the plug is easily accessible so as to quickly disconneet the
device if the need arises.
Connection
DANGER! Electric shock hazard!
The device can cause injuries due to improper installation!
Before installation and connecting the local power grid
specification should be compared with that of the device
(see rating plate). Connect the device only in case of
compliance!

The power supply circuit with the socket must be protected by the fuse of at least 16A.
Connect the device directly to a single grounded socket. Do not use any power bar or
multiple socket.