- 25 -
5. Installation and operation
5.1 Safety instructions
•
Never allow the power cable to come into contact with heat sources or sharp edges.
The power cable should not hang over the side of the working surface. Ensure that no
one can step on or trip over the cable.
•
The power cable must not be folded, bent or tangled, and must always remain fully
unrolled.
•
Never place the device or other objects on the power cable.
•
Do not lay the cable over carpets or heat insulations. Do not cover the cable. Keep
away the cable from operating range and do not dunk it into water.
•
Do not use the device in case it does not function properly, has been damaged or
dropped.
•
Do not use any accessory or spare parts that have not been recommended by the
manufacturer. These can be dangerous for the user or lead to damages of the
device or personal injury, and further, the warranty expires.
•
Do not move or tilt the device when in operation.
•
Avoid spraying the device with water, do not expose the device to atmospheric
precipitation or other moisture.
•
Never operate the device with wet hands.
5.2 Installation and connection
Setup
•
Unpack the device and remove packing material.
•
Put the device in a secure place capable of supporting its weight.
•
Never place the device on a flammable surface.
•
Do not locate the device near open flames, electric ovens, heaters or other sources
of heat such as direct sunlight. High temperatures can damage the device’s surface,
reduce cooling power and increase energy consumption.
•
In order to avoid failures of the compressor when assembling or transporting the
refrigerated showcase, it should not be tilted over an angle of 45° at any time.
Always use condenser and door with care as damages affect the optimal use.
