- 26 -
•
Maintain at least 10 cm from walls and other objects to ensure proper circulation of
air around the device.
•
Never cover the device’s ventilation ducts.
•
Do not put the device in spaces with high ambient humidity, as this may damage the
device.
•
Do not drill holes in the device and do not mount any objects on it.
•
Do not place any heavy objects on the device.
Connecting the device
WARNING! Hazard via electrical current!
The device can cause injuries due to improper installation!
Before installation the local power grid specification should be compared
with that of the device (see type label).
Connect the device only in case of compliance!
The device must only be connected to a properly installed single socket
with protective contact.
Never remove the power cable by pulling the cable itself; always grab
the plug housing.
•
Before beginning to use the device, leave it in place for at least two hours before
connecting it to a source of electricity.
•
After a power failure or removal of the plug, leave the device unconnected for
at least 5 minutes.
•
The electrical circuit must be secured to a minimum of 16A. Only connect the device
to a wall socket, do not use splitters or power strips.
•
Ensure the device’s plug is easily accessible if it becomes necessary to quickly
disconnect the device.
5.3 Operation
•
After unpacking the device and before connecting it, clean the device following the
instructions in 6.2 „Cleaning“.
•
Connect the device to a single grounded socket.
•
The digital display will show the temperature and the LED cooling indicator will
come on.
•
The device should reach the set temperature before food and beverages are
placed inside.
