![background image](http://html1.mh-extra.com/html/bartscher/195-plus/195-plus_manual_4110103019.webp)
Installation and operation
174196
17 / 28
EN
To securely use the slicing machine, keep at least 20 cm clearance from the slicing
machine and walls, objects, cupboards, etc.
• The clearance from the floor should be approx. 80 cm.
• Place the appliance in a room, in which temperature ranges from +5°C do +32
°C, and the maximum moisture level should be 70%.
Power supply connection
• Verify if technical data of the appliance (see rating plate) correspond with the
local electric power grid specification.
• Connect the appliance to a single, properly grounded mains socket with
protective contact. Do not connect the appliance to a multi-socket.
• The power cord should be laid in a way preventing anyone from threading on it
or tripping against it.
5.2
Operation
Before First Use
1. Thoroughly clean the appliance and equipment before first use observing
instructions in section 6
'Cleaning and Maintenance'.
2. Fit the enclosed slice guide (16).
3. To this end, loosen the lower screw (f) of the
previously installed blade protection device (20)
on the rear of the appliance with a suitable
screwdriver.
4. Attach the slice guide (16) to the blade
protection device (20) using the loosened screw
(f).
Fig. 5