Installation and operation
100082
11 / 20
EN
• Do not place the appliance in direct sunlight or in the vicinity of heat sources
(cooker, radiator, heating devices, etc.). Heat sources may negatively affect
power consumption, and restrict functions of the appliance, too.
• In order to avoid damage to the compressor, do not tilt the appliance more than
45° when positioning or transporting it.
•
The el ectric soc ket s hould be easil y accessibl e s o it is pos sibl e t o quic kl y disconnect t he power c ord when nec ess ar y.
The el ectric soc ket s hould be easil y accessibl e s o it is pos sibl e t o quic kl y disconnect t he power c ord when nec ess ar y.
The el ectric soc ket s hould be easil y accessibl e s o it is pos sibl e t o quic kl y disconnect t he power c ord when nec ess ar y.
• Keep minimum distance from walls and objects; maintain clearance of 15 cm at
both sides and at the rear, and 20 cm over the appliance.
• The appliance should be installed only in rooms, in which ambient temperature
falls in the range of 10°C
– 38 °C.
Power supply connection
• Verify if technical data of the appliance (see rating plate) correspond with the
local electric power grid specification.
• Connect the appliance to a single, properly grounded mains socket with
protective contact. Do not connect the appliance to a multi-socket.
• The power cord should be laid in a way preventing anyone from threading on it
or tripping against it.
• If in winter the ice-cube maker is brought from the outside to a room, leave it for
a few hours to heat up and reach the room temperature before switching it on.
• Before connecting the appliance to the power supply, wait 1 hour for the coolant
to stabilize.
• After a power failure or when the plug is removed from the socket, reconnect the
appliance to the power supply after 5 minutes at the earliest.
•
The el ectric soc ket s hould be easil y accessibl e s o it is pos sibl e t o quic kl y disconnect t he power c ord when nec ess ar y.
The el ectric soc ket s hould be easil y accessibl e s o it is pos sibl e t o quic kl y disconnect t he power c ord when nec ess ar y.
The el ectric soc ket s hould be easil y accessibl e s o it is pos sibl e t o quic kl y disconnect t he power c ord when nec ess ar y.
Содержание 100082
Страница 1: ...HK150 100082 ...
