9
OPERATION
The heater can be operated either by the switches located in the top right side of the fireplace, or by
the supplied remote control.
Control Panel Access
The Standby switch at the center right hand side of the foreplace must be first switched on.
It takes time for the receiver to respond to the transmitter.
DO NOT press the buttons more than
once within two seconds for correct operation.
Press the
ON/OFF
button on the remote once, this turns the fireplace fire effect on and
off.
Press the
DIMMER
button to operate the Dimmer mode. Each time the Dimmer button
is pressed, the flame intensity decreases. There are 5 brightness levels you can cycle
through.
Press the
HEAT
button once for the low heat setting (750W), press twice for for the
high setting (1500W) and press again to turn the heat off.
The highest temperature of the thermoset is 82°F. There are several levels you can
cycle through between 62 °F to 82 °F, as well as the OFF setting.
°F
Press the
TIMER
button to cycle through the timer settings: 1H to 8H, as well as the
OFF setting.
Pressing the
COLOR
button changes the flame color. Pressing once will turn the amber
embers to blue, pressing three times will bring you back to amber color.
Infrared Remote Control
RELEASE
PULL
RELEASE
OPEN
PUSH
Fig. 6
Fig. 7
