Thanks for your kind appreciation for choosing our products
Please read this instruction carefully before use, and with full understanding. Please contact the dealer or manufacturer
when you encounter difficulties or faults. Do not disassemble the tool by yourself to avoid losing small parts or contaminating
the hydraulic system losing its function
Main safety notice
Warning
：
In order to avoid an accident such as fire,electric shock ect,
All must follow below attentions.
Work place
1. Keep work place clean and bright,disorder and dark will be easy to cause accident.
2.
Operate the tool after children and bystander leaving. Distractions can cause you to relax control.
3.
This tool is not electrically insulated. Do not use it when the wires or terminals are live
。
4.
Do not use or store tools in high temperature environment with strong acid, strong alkali or other
corrosive liquids, gases. Prevent tools from corrosion and components from aging.
5.
Do not charge or use the product in the presence of flammable, explosive liquids, gases and dust
Electric safety
1.
The power plug of the charger must match the socket and must not be altered in any way.
www.barton-tools.com
2.
Do not expose chargers, batteries to rain or damp. otherwise water entering the electrical system will
increase the risk of electric shock. Do not abuse the wire, never use the wire to carry, pull or unplug the
charger. Damaged or tangled wires increase the risk of electric shock
3.
Do not use or disassemble the charger if it is badly hit, dropped, or damaged.Hand it over to a qualified
maintenance person. Using a damaged charger may be in danger of electric shock or fire.
4.
Do not charge the battery when the temperature is lower than 10 ° C or higher than 40 ° C, and do not
cover or block the charger and battery heat dissipation hole during charging
5.
Unplug the charging power supply when encountering thunderstorms and lightning
6.
Do not short-circuit or burn the battery to avoid explosion
Personal safety
1.
Keep alarm when operate
.
Do not operate this tool with fatigue, drug, alcohol, or treatment. Distraction during the
operation may result in serious life injury.
2.
Use and wear safety equipment. Wearing safety helmets, non-skid gloves, insulating shoes, goggles, and safety
belts (working at height) can reduce personal injury.
3.
Do
not operate brutally when using. Do not start or stop
unconsciously , It may cause the microprocessor and
electronic protection system failure or damage
4.
Do not put your fingers or any part of your body into the jaw of the working pliers to avoid being clipped
5.
Store unused tools out of reach of children and do not allow people who are not familiar with the tools to
operate it.
