M
aintenance and
S
ervice
1.
The tool is a product with excellent design and technology, it is not allowed to disassemble internal parts at all, all the failure caused
by users' unauthorized disassembly or improper use of the damage, no longer within the scope of warranty service, but for users to
make paid repair (only charge parts cost).
2.
Keep dry. Rain, moisture, and various liquids or moisture can corrode tool housings, metal surfaces, and electronic routes. If the tool
is wet, take out the battery and reinstall the battery after completely dried
3.
Do not store in too cold or too hot places.
Too much cooling or overheating can deform plastic part. shorten the life of electronics and
damage batteries.
4.
Do not use strong chemical cleaners or strong detergents to clean
To ensure the service life,replace the hydraulic oil in the tool once a year
6.
If the tool is not in use for a long time, reset the piston to the bottom, wipe the tool surface, smear rust-proof grease on the metal
surface of the crimping die and the tool, take out the battery, and store it in the tool box
7.
Sealing components are worn. If hydraulic oil leaks after a period of use, contact the dealer or manufacturer for professional
maintenance personnel to replace the sealing components.
5
.
www.barton-tools.com
