12
Night Lockout Cools – Used to disable all cooling outputs from running during the Nite
stage. This is used as an energy-saving feature. Enabling Night Lockout will prevent the
dehumidification cycle from working.
Set Clock -
Select to set the ClimateBoss clock. It is in military time. For Example: 3PM is
entered as 15:00, 12AM is entered as 0:00, and 10AM is entered as 10:00. The clock can also be
changed from the main screen by pressing Time.
Set Date – Select to set the Day, Month, and Year in the controller.
Temperature/Speed Units – Used to change the temperature & speed scale for the
controller. Options are Fahrenheit/MPH or Celsius/KPH.
Number of Zones – Used to set the number of zones for the controller. When set to
single-zone mode, the temperature readings from the 2 thermistors are averaged to
determine the temperature. When set to 2 zone mode, thermistor 1 reads the
temperature for zone 1 and thermistor 2 reads the temperature for zone 2. Default = 2.
Configuration
Controller Info
– Contains the CIS ID used to set a unique ID for each controller. Firmware
Version, Serial Number and Mac address for the controller are also shown here. This
information is used in conjunction with the Headgrower mobile app for remote monitoring and
control of the Climate Boss. See the WiFi section for more information about firmware updates.
WiFi
– Set up Wi-Fi for Firmware download and for remote control and monitoring from the
Headgrower mobile app (Requires subscription).
Enable Wi-Fi – Enable or disable the Wi-Fi feature. Disable turns Wi-Fi capabilities off at
all times. Enabled turns the Wi-Fi on any time it is within range of a setup Wi-Fi
connection.
Wi-Fi Setup – To set up Wi-Fi for the ClimateBoss, press “Wi-Fi Setup” and the
controller will scan for nearby networks. Select your desired network and enter the
password (if required) and press “Save”.
***For security reasons, we highly recommend that the user place all controllers into
a separate logical network or VLAN, separate from other networks, routers, and
hardware.
Update Firmware – If your controller is connected to the internet through the WiFi
module, by pressing Update Firmware, you will connect to
any updates are available. Once it has found the firmware, you have the option to
update your controller. Updating firmware will NOT affect the timer programs.
Reset WiFi – Press Reset WiFi when having trouble with the WiFi connection. The
controller will reset the WiFi connection and attempt to reconnect to your currently
saved connection.
