15
VIEW (information) SECTION
View Section - Contains buttons to look up cone temperatures, review programs, and view the
current segment. View Segment is also used to skip step during Vary-Fire Programs.
Cone Table
-
Used to look up the temperature of various cone numbers. The temperature that is
displayed is for self-supporting cones with a heating rate of 108oF/hr. To use, press Cone
Table, enter the cone number you want to look up, press ENTER; the cone temperature will
be displayed then the controller returns to IdLE.
Review Program
- The information displayed when Review Program is pressed varies
depending on whether you are using Cone Fire or Vary Fire. When Review Program is
pressed, each of the steps in the current firing profile is displayed one after another
changing every ½ second.
In Cone Fire Mode - The display will show the selected firing profile in the following
order:
Display shows
Description
F-GL
Firing speed, fast glaze
PRHT/0.00
Shows zero preheat time at 200°F
CONE/ 04
Programmed for cone 04
o
F /1945
Top temperature for cone 04
CNOS/0
Shows 0°F cone adjustment
HOLD/0.00
Indicates zero hold at the top
temperature
dELA/00.00
Indicates delay start of 0
ALRM/9999
Alarm is disabled
ERCD/ on
Error detection is enabled
FIRE/xxxx
Shows the number of firings with
this controller
