LEDs
Pwr+
Pwr- (GND)
RS232-RX
RS232-GND
LEDs
Pwr+
Pwr- (GND)
RS232-RX
RS232-GND
LEDs
Pwr+
Pwr- (GND)
RS232-RX
RS232-GND
10k
to PC
optionally
Buttons
Buttons
Buttons
to Power Supply
to Power Supply
to Power Supply.
optionally Buttons
to LEDs/Stripes
to LEDs/Stripes
to LEDs/Stripes
optionally Buttons
optionally Buttons
In the examples above 3 modules build a network. Please note: the module interconnection are 2
lines: GND ond RS232-RX.
Factory preprogrammed Effects
Each module is shipped with 8 factory preprogrammed effects:
Effect 1:
Standard colour change, colour change each 5-60 seconds (depending on the
internal DIP switches). Colour transition time: 2.5 seconds
Effect 2:
Slow (very soft) colour change each 30-180 seconds (depending on the
internal DIP switches). Colour transition time: 10 seconds
Effect 3:
Randomly faded colours „Blob“
Effect 4:
User defined-colour change (can be changed by the „Chromoflex
Editor“ software for PC, default is red-green-blue)
Effect 5:
Randomly changed colours „LSD“
Effect 6:
Simulation of a fire „Fire“
Effect 7:
Simulation of a thunderstorm with lightnings („Flash“)
Effect 8:
Randomly coloured flashes („Burst“)
If you would like to edit a own colour change, this can be done very easily with our free software of PC
„Chromoflex Editor“. This software can be downloaded for free from our Internet site (see end of this
manual).
Note: The Chromoflex-Modules are based on a programmable microprocessor, that is also capable of
performing other complex tasks. We will be happy to realise your ideas for professional products.
Don’t hesitate to send us on email.
The 8 effects can be selected by the 4 buttons. Each button selects two effects:
Chromoflex - Manual - English V1.07
- www.barthelme.de
Rev. 02.07.2006
- 7 -
