Depending on the surface and the application, the installation can be performed with the
mounting
profile
(Art. 4010010x), with thermal conductive double-sided
adhesive tape
(Art. 30033009) or with
construction adhesive
(Art. 63500030).
The use of the mounting profile (Art. 4050004x) is permitted only in combination with the technical
vaseline (Art. 63500020)!
» When using the
bracket set
it is recommended to install a bracket approx. every 25 cm to ensure a
secure holding of the AQUALUC C:URVE mini.
» If you use
adhesive tape
, please ensure that the surface to be taped is dry, even, and clean (no fat, oil,
silicone and dust particles). To achieve best adhesion, the surface of the AQUALUC C:URVE mini should
also be clean (if necessary clean the surface of the LED stripe with a soft, slightly damp cloth. To remo-
ve more severe stains use a standard cleansing material
without
abrasive elements).
Fix the tape on the bottom side of the AQUALUC C:URVE mini or on the mounting surface and press
the LED stripe firmly. The contact pressure should not exceed 10-15 N/cm
2
, otherwise the LEDs or the
electronic parts of the AQUALUC C:URVE mini could be damaged.
» If you select the
construction adhesive
then it is important to ensure an even and slight wave form dis-
tribution. The amount of adhesive used should be relative to the size of the required adhesive surface.
ILLUSTRATION 1:
PLEASE NOTE BEFORE INSTALLATION
The product should always be installed by two people in order to avoid a sagging of the LED stripe.
