2. Delivery / Scope of delivery
After receipt of the goods please check whether the delivery is complete and whether the items are intact.
The delivery consists of one reel AQUALUC C:URVE mini including a connection cable.
3. Area of application
Examples for applications of the AQUALUC C:URVE mini:
• accent illumination
• illumination for outdoor, wellness, spa and pool areas
• architectural illumination
• backlight for illumination of letters
• shipbuilding
• exhibition lighting
• stairway illumination
• illumination for bars, and many more
4. Technical data [extract]
5. Installation and commissioning
5.1 Installation and processing guidelines
• The
processing temperature
range of the AQUALUC C:URVE mini is between 15°C and 35°C. Tempe-
ratures below this can negatively influence the flexibility of the stripe and can result in damage. If the
AQUALUC C:URVE mini was previously exposed to lower or higher temperatures, then it must be
slowly
brought into the processing temperature range.
• Please note that the AQUALUC C:URVE mini can marginally expand or contract with
changes in tempera-
ture
at the installation location. This is not a defect in the product but a normal physical process. Speci-
fically, this means that there is a linear thermal
expansion
of approx. 1 mm per meter and 15 °C change
in temperature. This extra expansion gap should always be taken into consideration prior to installation.
• To avoid damaging the AQUALUC C:URVE mini, especially during
unrolling
or
mounting
, it is important
that
two people
install the product. This is especially valid for a length of one meter (1 m) or more. Care
should be taken that the product does not sag otherwise irrevocable damage can occur (see illustration
1). Furthermore, the encapsulation of the product may not be damaged otherwise a sufficient protection
of the LED stripe cannot be ensured.
It is important to never exceed the minimum bending radius!
• The
minimum bending radius
of the AQUALUC C:URVE mini is 5 cm. The minimum bending radius
may not be exceeded and the stripe may not be bent, otherwise the AQUALUC C:URVE mini could be
damaged (see illustration 2).
• The product is suitable for
installation
on the floor, wall or ceiling - indoors and outdoors. Make sure that the
product is mounted on a clean, flat and stable surface.
Detailed technical information can be found in the relevant data sheet at
www.barthelme.de
AQUALUC C:URVE
mini
24 V DC
operating voltage
Outdoor IP67/68
protection class
60.5 W
Typ. power
2,700 K | 3,000 K | 4,000 K | 5,700 K
colour temperatures
8 mm
LED pitch
7,580 mm
dimension length
6 x 13.5 mm
dimension
width x height
