BARTHE
www.barthe-audio.com
THE INNOVATION IN AUDIOVISUAL
21
VI – QUESTIONS
Double check the following points before concluding that your system is down.
1-
Are all connections correct?
2-
Is the system used in accordance with the instruction manual?
If the system is not working properly, perform the check list below. If any of these checks does not resolve the
problem, the system may be defective. Then immediately unplug the power cord and contact your dealer.
SYMPTOM
CAUSE
SOLUTION
The device does not turn on
when you press the power
switch.
- The power cord is not properly
plugged into the wall outlet.
- The main plug is not working.
- The mains voltage does not
match the device’s specification.
- Blown fuse.
-Plug the power cord into the wall
outlet.
-Call an electrician.
- Obtain an adapter.
- Replace the fuse (see section
« cleaning »).
The ON/OFF button seems to
work randomly.
-There is a 3 seconds timing
protection of the unit when the
unit is turned off.
-After power is turned off, wait at
least 3 seconds before switching it
on again.
The device does not react to the
action of keys.
- The switch is in the Off
position.
- The device is not connected.
- Turn the switch On.
- Disconnected and reconnected
the device.
There is no sound.
- The level of the command of the
general volume is insufficient.
- The level of the volume control
of the source is insufficient.
- Adjust the volume control on the
right position.
- Adjust the volume control on the
right position.
The total number of CD tracks is
not displayed when loading the
disk.
- The disc is inserted upside
down.
- The disk is dirty.
Improper disc format.
- Reload the disc.
- Clean the disc.
- Use the correct disc format.
The sound is choppy.
- Dust, fingerprints, saliva, etc on
the disc.
- The disc is scratched.
- The player is not stable and is
vibrating excessively.
- Clean the disc.
- Replace the disc with a non-
scratched disc.
- Place the player on a stable
surface free from vibration.
