6
Rev. 1.4 (01.2021)
Getting started with mpSmart-Dosing
The mpSmart-Dosing includes 3 main components:
A mp6 micropump, a mp-damper and a SFL3S1300F flowrate sensor.
For the fluid channel, connect them as shown in the following figure. Use tubes with an inner diameter 1.3 mm for
mp6 micropump in- and outlets as well as for the mp-damper. The
SLF3S-1300F
requires tube connectors on both
sides which are included in the mpSmart-Dosing (UP D-646; Swivel Barb Adapter, 1/16" ID Tubing). As for the tube
lengths between mp6 micropump & mp-damper or mp-damper &
SLF3S-1300F
we recommend at least 50 mm.
For the wiring, use the included cable to connect the mp6 micropump and
SLF3S-1300F
to the Driver PCB and the USB
cable to connect the Arduino on the Driver PCB with your PC.
