7
Rev. 1.4 (01.2021)
Starting the Evaluation Software
After installing the included software execute the mpSmart.exe to start it up. The
Connection Manager
can be found
in the
top left corner
. Make sure the USB cable is plugged in and the device is recognized and choose the right COM-
Port. When selected click on
„Connect“
to start the communication between the program and the driver. If the device
was not found you might need to install the driver for the Arduino nano microcontroller manually.
To start your mpSmart-Dosing all you need to do is to
choose one of the four flowrate ranges
, e.g. 4500
–
8000
µl/min.
The exact flowrate
can be set by
the the slider underneath or the text field next to it.
