Installation Instructions
TWISTO/N-B
21-56N0-7N0001/392164
Reservation
Technical data subject to change without notice.
No claims for damages arising from alternations, errors or misprints shall be allowed.
Page 6 / 20
Connection of the trace heater
Make sure that the tip of the assembly and the groove of the
clamping sleeve are properly aligned.
Push the clamping sleeve against the sleeve and insert into the
assembly.
Power connection, powered splice, T-, powered T and
X-connection kits:
Splice kits:
Completely
screw together the threaded cap and the assembly.
WARNING
Risk of fire or malfunction. Double-check that there is no gap left
between the threaded cap and the assembly.
If applicable, repeat steps 3 to 8 to connect all remaining trace
heaters:
Splice kit:
Powered splice kit:
T-Connection kit:
Powered T-Connection kit:
X-Connection kit:
7
8
9
