8
i.
Before updating the firmware you need to create an account by visiting the website
ii.
Login to your account and download the TECH200 programmer software to your PC.
iii.
Double click on the installer “TECH200 Programmer Installer.msi”. This starts the installation wizard.
iv.
When the start-up screen appears, press the “Next” button to install the TECH200 programmer
software. By default, this will be installed to “C:\Program Files\TECH200 Programmer\”. The folder will
be created if it doesn’t exist.
v.
Press “Next” and the program will be installed. To exit the installer when it has finished, press “Close”.
vi.
Next, you can select “All programs” from the start menu, and “TECH200 Programmer” will be available
for use. Click on the shortcut to start the program.
vii.
To get the latest TECH200 firmware, login to your account and select the tool that you wish to update.
viii.
Download the firmware file to your PC, making a note of where the file has been downloaded. This is
usually “My Documents/Downloads” for most browsers.
ix.
Start the PC update program “TECH200 Programmer”.
x.
Follow the instructions displayed by the program to update the TECH200.
N.B The firmware is locked to a particular tool by serial number, and it’s not possible to update a tool with a version
for a different tool.
