Bartec POLARIS COMFORT Series, Руководство пользователя

Страница: 48 / 64

Commissioning
POLARIS COMFORT - for Zone 1/21
POLARIS Touch Panel 5.7" / 10.4" / 12.1"
EN 42/57
Technical data subject to change.
06/2017
The CF card (4 GB) used is divided into:
Partition C
Size: approx. 2 GByte
boot drive with operating system protected by EWF
Partition D
Size: approx. 1.8 GByte
application data (BMS Graf Runtime) not protected by EWF
Behaviour when EWF is activated?
Partition C
When the EWF is activated, it is not possible to write on Partition C. All write accesses to
the C: partition are redirected into an RAM overlay. The changes that are made are not
available after rebooting.
Partition D
Is not protected by EWF. Write access to Partition D is possible at any time. The data is
still available after a reboot.
Data can be lost during write access if there is a power failure.
Procedure when changing system settings
ATTENTION
Switching off when the EWF is deactivated can cause a loss of data inside the
operating system!

Activate the EWF immediately after changes.

Shut down the operating system properly.
Deactivating the EWF
(1)
Select "CMD" in the START MENU.
(2) Enter the
"ewfmgr c: /commitanddisable"
command line into the command
window.
(3) Confirm with the Enter key.
(4) Reboot the system.
(5) Changes/settings can be made in the
operating system.