Bartec Pegasus 7100, Руководство пользователя, Страница: 54 / 68

Maintenance, Inspection,
Repair PEGASUS 71xx series
46/47
Technical data subject to change without notice.
09-2011
9 Maintenance, Inspection, Repair
Caution!
Only trained and qualified personnel who have been authorised and trained to assemble
electrical components in hazardous (potentially explosive) areas may commission the
PEGASUS 71xx series or do any maintenance work on devices from that series! Such
personnel is familiar with the installation, assembly, commissioning and operation of the
PEGASUS 71xx series, has been informed about the risks and has gained the
qualifications required for this work through previous work experience.
Maintenance intervals
The mechanical status of the devices should be checked at regular intervals. The length
of the maintenance intervals depends on the ambient conditions. We recommend
checking at least once a year. Regular maintenance is not necessary if operated
appropriately in conformance with the installation instructions and with due consideration
to the ambient conditions.
Inspection
Under IEC 60079-19 and EN 60079-17, the owner/managing operator of electrical
installations in hazardous areas is obliged to have these installations checked by a
qualified electrician to ensure that they are in a proper condition.
Servicing
Adhere to the applicable regulations under Directive 99/92/EC, IEC 60079-19 and IEC
60079-17 when servicing, doing maintenance work on and testing associated operating
equipment!
Assembly/disassembly, operating and maintenance work may be done only by trained
specialists. The statutory rules and other binding directives on workplace safety, accident
prevention and environmental protection must be observed.
Observe the national waste disposal regulations when disposing of the equipment.
Instructions for Repairs
If you wish to send in a defective device for repair, please read the RMA procedure
guidance first. Then fill in and sign the RMA (Return Merchandise Authorization) form and
send it to our "Retouren Center".
Email: services@bartec.de Fax: +49 7931 597-119
We cannot guarantee any contractually agreed processing times for devices that are sent
in without an RMA number.
The RMA guide and the RMA form are available on our homepage for downloading.
http://www.bartec-group.de Quality and culture RMA form
Have you any questions? Write us an e-mail or call us.
E-mail: services@bartec.de Phone: +49 7931 597-444